Cabinet makeover isn’t difficult. It’s just a matter of time to get it done. You’ll only need some imagination, a few tools and materials, and a good bit of elbow grease. In fact a cabinet makeover can be done just over a weekend or two (depending on the number you have to refinish). All you need to do is to follow this simple cabinet makeover guide.
What to Know about Cabinet Makeovers
You might prefer refinishing or cabinet repurposing. But, it’s time to make a change and that’s the way to go. They are just an eyesore and it’s high time to do something about it. To save a little money, you’ve decided to do the initial work and take down the old cabinets. But, you certainly don’t want to create more work or make a big mistake.
Refacing your kitchen cabinets includes covering the exposed frames with a thin veneer of real wood or plastic laminate. Doors and drawer fronts are replaced to match or complement the new veneer. New hinges, knobs, pulls, and molding complete the transformation. --HouseLogic.com
The first thing you need to do is to decide what type of look you want. Veneers and new paint options give you plenty of choice and are usually simple to adhere. The biggest challenge will be keeping the bare cabinets free of dust and debris, which can lead to a lot of extra work or even sabotage the entire project.
Cape Coral Cabinet Makeover Guide
Cabinet refurbishment doesn’t require a whole lot of specialized skills. In fact, just about anyone can do cabinet refurbishment. Here’s a quick cabinet refacing guide to follow:
- Gather your tools and materials. You’ll need a drill-driver or screwdriver, pliers, plastic cups, eye protection, dust mask, paint drop cloths, sandpaper, primer, paint, roller or spray gun, and scrap wood. Plus, you’ll also need new hardware, such as hinges and pulls.
- Remove all hardware. The first step is to remove the doors and the hardware. Put these items aside for later use, be it to return to the cabinets themselves or for something else.
- Sand and prime the wood. Next, you’ll sand down the cabinets and the doors to remove the old paint. Once sanded, you can then apply a primer, following the manufacturer’s instructions.
- Brush on a coat of fresh paint. Once the primer dries, it’s time to add the first coat of paint. Allow it to dry, then add another coat of paint. Once it’s dry, add a third coat of paint, if necessary.
- Replace the hardware and rehang. Once the paint dries, you can then delicately replace the pulls and hinges. With the new hardware attached to the doors, rehang the fixtures in your kitchen to finish.
If you just need remodeling debris removal in Cape Coral, go ahead and phone 800-433-1094 or visit AAA Rousse Services.