Old wainscoting removal isn’t necessarily difficult. Meaning, it does not require special skills or tools. But, it’s not all that easy because it does require a bit of patience. The reason is when you remove wainscoting, you need to avoid damaging the wall behind it. Otherwise, you create more work and incur an added expense. So, read on to learn more about the old wainscoting removal and disposal process.
Remodeling Debris Disposal
First, let’s begin with a bit about the material. Wainscoting actually dates as far back as the 1300’s, when the Dutch used it to protect the bottom half of plaster walls. (It has even had more applications through its existence.) Today, wainscoting remains a very ubiquitous home feature, offered in a variety of styles.
Wainscoting panels can be found in many houses across the country. This type of wall covering is very common and it comes in a variety of different styles and colors. If the wainscoting in your house does not work with your decorative scheme, you might find it necessary to remove it. --Do It Yourself
But it does eventually begin to show its age or could be damaged by a leak or electrical mishap. Whatever your reason, you have a room partially lined in wainscoting and it needs to go. So, you’ll have to manually take it off the wall. And, that means using a few common hand tools.
Old Wainscoting Removal in Venice
To start the wainscoting removal process, you’ll need a few common tools. Once you have your tools ready, follow these old wainscoting removal steps:
- Break the seal. Wainscoting is usually installed sealed against the walls. This is typically done with caulk so moisture cannot get between the paneling and the walls to form mold. Use a utility knife to cut into the seal gently across the top of the wainscoting, going around the entire room.
- Remove all the nails. After you cut the seal, you can then locate the nails fastening it to the wall and pull them out, one at a time. This will take some time but shouldn’t be too difficult.
- Pull of the baseboards. You’ll need a pry bar again to pull away the baseboards. Exercise caution, especially if you have hardwood floors, so you don’t accidentally gouge them.
- Take the panels off the wall. With the top railing off and the baseboards off the wall, you can then simply pull the panels away from the wall to finish.
When you need remodeling debris removal in Venice, just phone 800-433-1094 or visit AAA Rousse Services.
