Vinyl floor replacement. It’s a really big home improvement project to tackle. Plus, one that will entail having to install new flooring. Also, you’ll have to deal with all the material debris, too.
(This is why so many people call in a local junk hauling service.) Now, if you’re going the DIY route, you’ll need a plan of action. So, read on to learn more about vinyl floor replacement and what you need to know.
About Engineered Flooring
Like other types of engineered flooring, vinyl sheet or linoleum can be manufactured to look like wood flooring, stone flooring, or practically any other type of flooring material. Another big advantage to linoleum is that it is super easy to clean and maintain. However, though it’s got only a few negatives, like the fact that it is susceptible to damage from sharp objects.
One of the most frustrating home remodeling tasks is trying to remove an old linoleum or vinyl floor. Even when the linoleum is pulled off, things only get worse. Now you’re faced with gobs of old glue that seem harder than meteorites all over the floor. --ImproveNet
One of its most problematic attributes is the fact that vinyl sheeting does not typically age well. It generally becomes brittle over time (and usually discolors, as well). Which means it’s harder to take up off the subfloor because brittle linoleum will break into small pieces, making it more difficult to remove as a whole.
Vinyl Floor Replacement in Clearwater
To begin the vinyl floor replacement process, you’ll first need to empty out the room. Don’t leave anything behind, including any decor and/or furniture. Then, do the following:
- Test for asbestos first. There’s a possibility that linoleum flooring can contain asbestos. So, don’t take a chance and test for the substance before you do anything else. If it tests positive, you’ll need to bring in a professional crew.
- Carefully remove the linoleum. Start with a corner and attempt to pull up the linoleum from that corner over to the opposing side. If it’s glued down, you won’t be able to pull it off the subfloor. So, use a floor scraper to remove the linoleum.
- Remove the adhesive. There are plenty of adhesive removers available. But, these can soak into the hardwood and damage it permanently. Try using steam or even boiling water to loosen the adhesive. Then, use a floor scraper to remove any remnants of the glue.
- Junk the old linoleum floor. Now the linoleum flooring is up, you can junk it. But, it’s also possible to reuse it, if it remains in good condition. You might have a use for it in another location.
Once you have the flooring up and need remodeling debris disposal in Clearwater, you can just phone 800-433-1094 or visit AAA Rousse Services.
