Water-soaked ceiling repair isn’t the most difficult thing to handle. But, it’s not for those without some solid handyman chops. However, if you have the skills, you don’t necessarily need to be an experienced contractor or a rehabilitation expert. Although, it will present a few different challenges. Read on to see a basic water-soaked ceiling repair guide you can follow.
About Construction Material Disposal
Before you begin tearing stuff out, be sure to have a plan for all the waste you’ll generate. Don’t make the gigantic mistake of skipping over the inevitable waste disposal because it’s a hard and fast reality. So, schedule remodeling debris junk clean up prior to starting and you won’t have to worry about what to do with all that waste.
Repairing ceiling water damage, whether it is the result of a broken pipe or torrential rainfall, is particularly important for the health and comfort of your home. Left unaddressed, the damage can lead to mold and a weakened structure. Regardless of whether it is made of drywall, plaster, or some other material, no ceiling can be fully protected against these vagaries of water. For this reason, it is important to know how to repair damage once it occurs. --Do It Yourself
When dealing with a water damaged ceiling, there is usually more than meets the eye. Because of the structure of many residential homes, water soaks sight unseen into the trusts, joists, insulation, and ceiling. Which is to say, there’s a need to move stuff out of the way and cover the floor.
Water-Soaked Ceiling Repair in Punta Gorda
Okay, so you’ve got to start any water-soaked ceiling repair by preventing any more issues from the outside. Meaning, you must seal the outside roof. Depending on the type of roof over the home, this could mean a simple patch or replacing several components. Once the roof is sealed, do the following steps for water-soaked ceiling repair:
- Seal the outside roof. The very first thing you need to do is prevent any more water from leaking down from the roof onto the interior ceiling. This is actually one of the more difficult parts of the job. This is due to the fact it could just require a simple patch and seal or replacing several components.
- Take time to dry out the ceiling. After the outside roof is sealed off and no more water passes to the ceiling, you’ve got to dry out the ceiling. Use fans and open windows to expedite the process.
- Remove all of the damaged area. Cut away the damaged portion and remove a couple of inches around it. Cut a square or rectangle, and wear a dust mask, eye protection, and always be careful when on a ladder.
- Patch and prime and paint the entire area to finish. Cut a patch to put in place, the fasten into place. Prime and paint to finish the job.
When you’re ready to start the demolition process in Punta Gorda, just phone 800-433-1094 or visit AAA Rousse Services.
